Marshall Electronics Broadcast A/V Division Tajimi Optical Connectors for multimedia environments. Specialty plugs, jacks, plug receptacles and receptacles for all broadcasting cables.

Tajimi Optical Connectors

    APPLICATIONS

  • DTV / HDTV camera systems
  • Graphics transmission systems
  • Outdoor / indoor monitoring systems
  • LAN systems
  • Industrial robotics

Tajimi Optical Connectors


Cable Assembly Information » Click Here



  • The three-guide-ball "push-pull" one-touch lock system is adopted assuring a reliable connection and ease-of- use. Different from a threaded system, this system has advantages such as a snap feeling that confirms locking, less metal wear and superior reproducibility. Found in a wide variety of industrial applications.
  • The System enables power supply in addition to transmission of optical and electric signals.
  • Suitable for a wide variety of applications with flexible combinations in the range from 2 optical pins, 4 electric pins, and 6 optical pins.
  • Ultra-tight waterproof in the connected state with heavy duty use. Superior weather-proof feature with protection boots and a waterproof cap.
  • Excellent cable connection strength suitable for cabling in the field. Mechanical cable connecting system which withstands environmental changes.
  • Coaxial shield processing structure resistant to external noises caused by electric signals or a power source.
  • Cable assemblies such as compound multi-cable, and fiber cords with FC- and SC-type connectors are also available.


SPECIFICATIONS

Connections Push-Pull Lock
Number of Pins6 pins
Optical 2 / Electrical 4 pinsOptical 6 pins
OpticalInsertion Loss0.5dB max. 0.7dB max. (SMF)
0.5dB max (MMF)
Return Loss 30~50dB (depending upon the polishing method)
Applicable Fiber GI 50/125 (Multi-Mode), SM 10/125 (Single-Mode)
Mechanical &
Environmental
Waterproof
(connected stage)
IP67 (at a water depth of 1.5m, 48H)
Durability5,000 cycles3,000 cycles
Corrosion ResistanceMIL-STD-202 Method 101 48H
Electrical (Optic
Electric Hybrid
Type Only)
Voltage RatingAC500V (rms)
Current Rating10A
Withstanding Voltage Contact to Contact AC2,000V (rms),
Body to Contact AC1,000V (rms)
Insulation Resistance DC1000V 1,000MΩ min
Dimension (mm)Length / Max. Outer Diameter OPS92401-P 125mm / Ø26.5mm
OPS92402-J 122mm / Ø22.5mm
OPS2402-R 43mm / 29mm
OPS2404-PR 44mm / 29mm
(Coupling Ring O.D. Ø36)
 

*As for "the optical character ability value of product" and "the optical character ability value in  durability", there is case deteriorating with a stain by dust. However, minimum can restrain this  degradation by executing "maintenance" of the end face cleaning of an optics ferrules. "Periodical  cleaning of ferrule end face" is very effective in use of product.

 

MODELS


Connector Part No. No. of Pins
(Opt./Ele.)
ConfigurationBoot Part No.Cap Part No. Cable
OPS92401-P-(c)Opt.2/Ele.4Plug FS121-PBFS122-PC7084B (Belden) (Ø9.2)
OPS92402-J-(c)JackFS123-JBFS124-JC
OPS92405-P-(c)PlugFS121-PBFS122-PC M96040 (Mohawk/CDT) (Ø9.2)
OPS92406-J-(c)JackFS123-JBFS124-JC
OPS92407-P-(c)PlugFS121-PBFS122-PC M96414 (Mohawk/CDT) (Ø8.6)
OPS92408-J-(c)JackFS123-JBFS124-JC
OPS2402-RReceptacle-------FS125-RC Ø2.0 Fiber code × 2
OPS2404-PRPlug
Receptacle
------- FS126-PC

*Color rings of plug and jack are optional from the table below. Add register color code in (c).
Color RedGreenBlueBlackGrayNone
Code No.REGEBUBKGY N

PLUG - OPS92401-P-(c)

PLUG connector OPS92401-PPLUG OPS92401-P diagram
PLUG OPS92401-P diagramPLUG OPS92401-P diagram

JACK - OPS92402-J-(c)

Jack connectorJack connector diagram
Jack connector diagramJack connector tip diagram

PLUG RECEPTACLE - OPS2404-PR

PLUG RECEPTACLE - OPS2404-PRPLUG RECEPTACLE OPS2404-PR diagramPLUG RECEPTACLE OPS2404-PR diagramPLUG RECEPTACLE - OPS2404-PR diagram

RECEPTACLE - OPS2402-R

RECEPTACLERECEPTACLE diagramRECEPTACLE diagramRECEPTACLE diagram specs