The V-R63P-SDI is a rack mountable unit that has three independently controlled 5.8" active matrix LCD panels with loop through capability. These 16:9 high-resolution panels have a pixel count of 1200 x 234, and are rated at a very bright 350 candle luminance. Each panel has an SDI and a composite video input with an NTSC/PAL switch on the back for each channel. Each of the three screens has a built-in color bar generator, controls for brightness, color, tint, and contrast, and a selectable aspect ratio of 16:9 or 4:3. A built in 3 color tally system is also provided for each screen. Unit comes complete with power supply, and fits into any standard EIA 19" rack, at only 3 rack spaces high.

V-R63P-SDI

Triple 5.8"Wide Screen Rack Mounted Active Matrix LCD Panel with 3 Composite Video, 3 SDI Inputs and 3 built-in 10-bit D/A Converters

Triple 5.8 inch Wide Screen Rack Mounted Active Matrix LCD Panel

  • High Resolution LCD panel, 1200 × 234 pixels,
    280,800 total
  • Ultra bright 350 candle luminance
  • Two inputs per monitor: Composite Video and
    SDI (SMPTE 259M)
  • 3 High Resolution 10-bit SDI to composite
    video converters (one per channel)
  • NTSC/PAL switchable via switch on rear of the unit
  • SDI active loop- through has active clock recovery
    with automatic 75Ohm termination
  • Switchable 4:3 and 16:9 ratios
  • Three color, self-powered tally system provided
    for each panel
  • Individual color, tint, brightness and contrast controls for each panel
  • Built-in memory saves current setup when unit is
    powered down
  • Built-in Color Bar Generator
  • Unique 100 degree tilt adjustment while mounted in rack

The V-R63P-SDI is a rack mountable unit that has three independently controlled 5.8" active matrix LCD panels with active loop through feature. These 16:9 high-resolution panels have a pixel count of 1200 x 234, and are rated at a very bright 350 candle luminance. Each panel has an SDI and a composite video input with a NTSC/PAL switch on the back. Each of the three screens has a built-in color bar generator, controls for color, tint, contrast, and brightness, and selectable aspect ratio of 16:9 or 4:3. A built-in 3 color tally system is also provided for each screen. The unit includes power supply, manual and fits into any standard EIA 19" rack, at only 3U high.



SPECIFICATIONS
Display (Viewing Area)
5.8" (5.01" × 2.83")
Resolution (Pixels)
1200 H × 234 V
Dot Pitch
0.318mm × 0.307mm
Brightness (in cd/m²)
350
System
NTSC/PAL config. switch
Inputs per panel (total)
1 (3) Composite
1 (3) SDI
Dimensions
19.125"W × 5.14"H × 2.5"D
Approx. Weight
5 lbs
Power Consumption
9 VDC, 3.0 Amps