The V-R35P-SDI has been designed to fit in a 3U space on your rack. It may be necessary to center the unit up or down in order to not touch adjacent units in your rack when tilting. The V-R35P-SDI uses 12VDC, 3.0amp regulated power. Be certain that these specifications are met when using a power supply other than the one supplied by Marshall Electronics.

V-R35P-SDI

Ten 3.5" screen LCD Rack Mountable Panel with SDI inputs and Auto NTSC/PAL Detection

Owner's ManualSpec Sheet
VR35P SDI LCD Rack

  • High Resolution 320 × 234 pixels
  • Self-Terminated SDI Inputs with active loop-through
  • Automatic NTSC/PAL Video Signal Detection screen
  • 90 degree tilt adjustment while mounted in rack

The V-R35P-SDI is a rack mounted unit that has ten 3.5" active matrix LCD panels and accepts SDI inputs (ITU-R601) with reclocked loop-through capability. This unit has a unique feature that allows the unit to tilt up or down for optimum viewing angle. The unit fits in an EIA standard 19" rack -- three rack spaces high. Each of the ten screens has auto-signal recognition and auto PAL/NTSC recognition built-in. A blue screen will appear in the event of a signal loss. The V-R35P-SDI comes complete with a power supply.

Available

V-R35P-SDI specifications
Panel Number of Panels 10
Panel Size 3.5"
Resolution 320 H x 234 V
Aspect Ratio 3:2
Active Area 71.6 mm x 52.65 mm
Type LCD Panel
Brightness 250 cd/m²
Color Gamut YUV, RGB
Backlight type LED
Features Video Formats SD-SDI
Loss of Input Curtain Yes
Color Temperature D65
Self-Sensing Yes
System NTSC/PAL auto recognition
Re-clocked/Re-Shaped Yes
Input Connectors CVBS No
YPbPr No
SD-SDI Yes
Output Connectors CVBS No
YpbPr No
SD-SDI Yes
Input Status Display Yes
Power Consumption 12 VDC, 3.0 Amps
Power Switch Yes
Connector 2 pin twist lock
Compliance Compliance CE approved
Environmental Operating Temperature (C°) 32° F to 104° F
Storage Temperature (C°) -14° F to 140° F
Rack Unit dimensions 18.96" W x 5.2" H x 2.5" D
Pivot Angle Yes
Handles/Rack Ears Yes
Weight (Main Body) 5 lbs