Fully-Featured 18.5" ORCHID® Rack Mount / Desktop Production MonitorSpec Sheet (PDF) ORCHID Firmware Update (ZIP)
- 1366 x 768 display
- Waveform Monitor
- Color Vectorscope
- 16CH Audio Level Meters
- Tri-Color Tally
- 3G-SDI Inputs with Active Loop-Through
- HD-VGA and DVI-I Inputs
- Analog Inputs
- 3D Review
- False Color
- Color Peaking Filter
- Time Code (VITC/LTC)
- User Bit Extraction
- Red/Blue/Green/Mono Channel
- White Balance
- HV Delay
- Aspect Setting
- Scan Setting
- Stereo Speakers
The ORCHID® OR-181 was designed as an 18.5" Master confidence monitor for broadcast control rooms, transfer facilities, and other production control and editing areas. The OR-181 includes a wide variety of production tools used by video professionals including real-time Waveform, Vectorscope, Histogram, Audio Level Meter, Audio Phase Monitor and Audio Peak Alarm, along with 3D monitoring and analysis functions.
The OR-181 uses a 1366 x 768 high contrast ratio panel that can display high-quality images from any source or aspect ratio. All OR-181 screens are color matched at the factory and can be auto-adjusted in the field using an optional color probe system (Konica Minolta CA-310 Color Analyzer).
The OR-181 comes standard with two auto-sensing 3G-SDI inputs, along with DVI-I, VGA, and analog inputs. This unit can be used as a portable stand alone monitor equipped with front panel stereo speakers, integrated carrying handle, and desktop stand. An optional rack mount kit with tilt capability is also available.
The OR-181 has 7 user-assignable function keys as well as 4 rotary encoders for simple access to various monitor settings and functions. Analysis functions and measured data graphics are displayed as overlays while original video images remain intact. Additional display options include full screen views of the Waveform, Vectorscope, Audio data, and "Quad View" layouts.
The OR-181 can de-embed and display up to 16 channels of audio using up to sixteen 64-segment tri-color Audio Meters with user-adjustable reference levels. The ALMs also provide numerical indicators of headroom levels and a peak hold function. The Audio Channel Loss warning feature alerts the user with any detected audio errors during monitoring.
Other advanced features include 3D Review, Anaglyph 3D Views, Side-by-Side 3D, False Color Mapping, ClipGuide, Color Peaking Filter, and more.
|3D Side-by-Side Input|
|3D Luminance Difference|
|3D Color Anaglyph View|
The built-in waveform monitor (which includes adjustable White and Black clip level indicators) can be displayed in various aspect ratios, positions, and transparency options. The Waveform Monitor not only monitors luminance, but can also warn the user for out-of-range conditions such as overexposure or "blacker-than-black" errors with fully user-adjustable warning limits.
|REAL-TIME COLOR VECTORSCOPE
The built-in Vectorscope allows users to monitor color gamut range in real time. It displays in full color and can also be displayed in various sizes, positions, and transparency options. The Vectorscope has adjustable gain from 1x to 5x.
The Clip Guide function operates with both the Waveform display and Monochrome/Color picture display. Both the upper and lower Clip Guide levels are user-adjustable in order to accurately display over-and-under exposures during different shooting conditions. For example, the upper Clip Guide limit may be set to 85 IRE and the lower limit to 10 IRE. With these settings, any exposures over the set limit of 85 IRE will display red on both the Waveform and picture (if selected). The same will be true for blacks under 10 IRE.
It is important that LCD monitors match the color and gamma characteristics of a CRT monitor. To emulate CRT gamma, the non-linear curves are corrected by software algorithms. This process is complicated because the three non-linear colors (RGB) should be corrected simultaneously. The ORCHID gamma correction overcomes this problem and ensures correct matching between panels and channels.
|AUDIO LEVEL METERS
De-embeds and displays up to 16 channels of audio using sixteen 64-segment tri-color Audio Meters with user-adjustable reference levels. The Audio Level Meters provide numerical indicators and headroom levels, as well as peak hold function. Audio Channel Loss Warning prevents errors during monitoring.
|FRONT AND REAR PANEL AUDIO OUTPUT
Monitor any two channels at once through the front audio output jack or rear line output jack.
|EXTENSIVE MENU SYSTEM
7 user-assignable function keys with Rotomenu system.
White balance adjustment is essential in order to render colors correctly. To display colors correctly, gray scale should maintain identical color temperature. The white balance for ORCHID monitors defaults to D65 (6500K) so the user does not need to adjust white balance. LCD monitors have color-matching issues because white balance can be affected by a change in luminance level. Our unique color management system solves this problem.
|ONE BUTTON COLOR CALIBRATION
The ORCHID operating system includes an Automatic White Balance function that allows a "One Button" calibration procedure when used with a Konica Minolta CA-310 color analyzer. All ORCHID Series LCD panels are calibrated at the factory to ensure color conformity between screens.
|Panel||Number of Panels||1|
|Panel Size||18.5" Diagonally|
|Resolution||1366 x 768|
|Color Gamut||YUV, RGB|
|Loss of Input Curtain||Yes|
|Time Code (VITC/LTC)||Yes|
|Embedded audio from SDI||Yes|
|Control Inputs||Input Status Display||Yes|
|Tally / GPI||Tally|
|RS-485/422 w/ Loop Through||No|
|Controls on front Panel||Yes|
|User-Defined Function Buttons||Yes|
|Consumption||40W @ 24V|
|Connector||4-Pin XLR Connector|
|Environmental||Operating Temperature (C°)||0° F to 40° F|
||Rack Unit dimensions||17.4"w x 12"h x 3"d|
|Weight (Main Body)||12.1 lbs.|
|Available Battery Adapter Configurations||AB or V-Mount|
ORCHID is a registered trademark of Marshall Electronics, Inc.
• Optional Rack Mount Kit for the OR-181 Monitor