pov miniature broadcast camera in weatherproof IP67 rated housing. Perfect for any outdoor application

CV502-WPMB/WPM

Weatherproof Full-HD (3G/HD-SDI) 2.5MP Mini Broadcast Camera with 3.7mm Lens

Owner's Manual Download Images
Weatherproof IP67 rated miniature pov broadcast camera

  • 2.5 Megapixel 1/3-inch CMOS Sensor
  • Weatherproof IP67 rated Housing for outdoor applications
  • IP67: water protection submerged up to 1m (3.2") - total protection against dust, dirt, sand
  • CV502-WPMB:1920x1080p59.94/29.97, 1920x1080i59.94, 1280x720p59.94/29.97fps
  • CV502-WPM: 1920x1080p60/50/30/25, 1920x1080i60/50, 1280x720p60/50/30/25fps
  • 3.7mm HD M12 Lens comes standard - 2.8mm (CV4702.8-3MP-IR) & 6.0mm (CV4706-3MP-IR) also available
  • 3G/HDSDI (BNC) & CVBS (BNC) connections at end of 10' breakout cable
  • RS-485 (connector) & 12V Power (connector) at end of 10' breakout cable
  • Captures sharp & vivid color HD images at 0.2Lux (low light sensitive)
  • New WDR function supports high speed & high sensitivity to multiple light sources
  • Stepped (Red/Blue) Gain Control, Gamma, Brightness, and Shutter adjust via RS485 (Visca/Pelco)
  • OSD Menu Joystick, RS-485 connectable(Pelco/Visca)
  • Free Downloadable Software Control

Marshall Electronics incorporated everything the CV502-MB/M camera delivers and built a weatherproof IP67 rated housing around it - CV502-WPMB/WPM. Perfect for applications where weather becomes a factor; outdoor sporting events, nature observation, weather coverage, news coverage, reality TV, mobile broadcast, or any outdoor application where mother nature has an influence. Utilizing new state of the art 1/3-inch high speed sensor packing 2,476,296 pixels (2.5 Megapixels) of clear, crisp video capture through full sized 3G/HD-SDI (BNC) outputs at resolutions of 1920x1080i, 1920x1080p, 1280x720p & frame-rates of 60/59.94/50/30/29.97/25 fps. New proprietary pixel technology offers the lowest noise ratio on the market today capturing sharp, vivid color images in very low light conditions, as low as 0.05 lux. Industry leading low power consumption draws very low power in full 1920x1080p60/59.94/50fps modes. New weatherproof CV502-WPMB/WPM Pro-Series POV Cameras continue to offer Field-of-View flexibility with interchangeable lenses and convenience of HD-SDI outputs maintaining a broadcast standard for POV camera applications. New RS485 connect-ability offers remote camera control communication via SONY VISCA or PELCO protocols.


Compatible M12 Lens options for weatherproof CV502-WPMB/WPM
Part Number Description
CV4702.8-3MP-IR 2.8mm F2.0 M12 Lens with IR Filter
CV4706-3MP-IR 6.0mm F2.0 M12 Lens with IR Filter
These lens options will allow weatherproof cap to be used to maintain IP67
IP67 rated weatherproof mini camera on heavy duty Marshall stand
CV502-WPMB Weatherproof Camera on
Heavy Duty Pro Stand-Clamp

CV502-WPMB/WPM Applications:

• Broadcast Television • Professional Sports • College Sports • OB Vans/Trucks • Concert & Studio Music Video • Reality TV • Performing Arts • Culinary Shows • Car TV Shows • Hidden Camera Shows • International Racing Circuits • Off-road Racing • Horse Racing • House of Worship • POV Video Shots

CV502-WPMB/WPM specifications
Sensor Image Sensor 1/3" Progressive CMOS (Approx. 2.1 mega)
Scanning System 16:9 Progressive
Sync. System Internal
Effective Pixel 1920(H) x 1080(V)
Min. Illumination 0.2 Lux (Color), 0.1 Lux (Black/White), 0.005 Lux(DSS on)
Horizontal Resolution 1000TVL
Optics Lens CV502 comes with 3.7mm (M12 mount) - interchangeable
Functions Back Light Compensation WDR (Wide Dynamic Range)/BLC (Back Light Compensation), HLC (High Light Compensation)
Exposure Auto / Manual
White Balance Auto (3,000°K~8,000°K) / ATW (1,900°K~11,000°K) / Manual
Day & Night System AGC (Automatic Gain Control) / True Day/Night auto switch based on light environment (auto/manual) (ICR)
Electronic Shutter NTSC: 1/30~1/30000,
PAL:
1/25~1/30000, DSS( ~X64)
Functions Privacy Mask, Image Mirror, 3DNR, Flicker-less, Sharpness, Defog, DIS (Digital Image stabilizer), NegArt, Freeze, B&W
Video Outputs 3G-SDI (+optional Audio) 
HD-SDI (+optional Audio) 
SMPTE 424M(2.97Gbps):
1920x1080p @ 59.94fps (-MB/-CSB) or
1920x1080p @ 50/60fps (-M/-CS)
SMPTE 292M(1.485Gbps):
1920x1080p @ 29.97 (-MB/-CSB) or 25/30 (-M/-CS)
1920x1080i @ 59.94 (-MB/-CSB) or 50/60fps (-M/-CS)
1280x720p @ 59.94/29.97fps (-MB/CSB) or 50/60 (-M/-CS)
CVBS (BNC) Composite-CVBS (BNC): 700TVL NTSC/PAL
Audio Input MIC Input Mic Level (1Vrms). 2.5V Mic bias
16, 20, 24, 32 bits audio format. 48KHz sample rates
Gain: -12dB ~ 59.5dB
Control Interface RS-485 PELCO-P/D, SONY-VISCA protocol
8 bits data, 1 stop bit, no parity, 2400~115200bps
General Operation Temperature -10°C ~ 50°C
Power Input 12VDC (7V to 15VDC)
Power consumption Max 6W
Dimensions 37(W) X 37(H) X 35(D)mm
Weight (Net) Approx. 140g

Touchscreen RCP Camera Control

CV-RCP-100

Touchscreen RCP Camera Control
Remote adjust & match cameras via RS485

Mini Camera Stands and Mounts accessories

1/4"-20 Mounts

1/4"-20 Compact Camera Stands & Mounts,
Clamps, Articulating arms and more...

CV502/505-series Live from Las Vegas, Nevada

CV502/505-series Live from Las Vegas, Nevada

CV502/500 mounted on Hockey Helmet

CV502 capture wide-shot at College Basketball game

CV502/500 mounted on Basketball Backboard

CV502/500 mounted on Volleyball Net

Weatherproof Full-HD 3G/HD-SDI 2.5MP Mini Broadcast Camera

Camera Control Application

  1. Download Camera Control Program HERE
  2. Use USB to RS485/RS422 Converter (sold separately)
  3. Use cat5 or 24AWG twisted-pair wire (sold separately)
  4. Connect cable from RS485(+) terminal on Camera to T/R (+) on USB/RS485 converter
  5. Connect cable from RS485(-) terminal on Camera to T/R (-) on USB/RS485 converter
  6. Plug USB cable from USB/RS485 converter into USB port on Laptop or Computer (note ComPort#)
  7. Open up CamControl Program and match Serial Port to corresponding ComPort# used
  8. Select Baudrate in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > BAUDRATE
  9. Select Camera Address in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > CAM ID
  10. Select Open in CamControl Program
  11. Test connection by pushing MENU in lower right of CamControl Program - OSD Menu should come up on video signal
  12. Commands can also be sent without using OSD Menu
Camera Control Application software