Full-HD, 3G/HD-SDI 2.5MP Miniature Broadcast GENLOCK Camera CV565-MGB 3G/HD video signals up to 1920x1080p @ 59.94/50/60 frames per second

  • BROADCAST SOLUTIONS
  • CAMERA-TOP monitors
  • Cameras
  • IPTV-Streaming
  • CONVERTERS & SWITCHERS
  • ACCESSORIES
  • SUPPORT

    Contact Marshall Support



    (800) 800-6608

    Outside US: (310) 333-0606
    Fax: (310) 333-0688
    Support@marshall-usa.com

CV565-MGB

2.5MP 3G/HD-SDI/HDSDI/HDMI Full-HD Miniature GENLOCK POV Camera with interchangeable 3.7mm HD Lens

Owner's Manual Quick Reference Manual Download Images
2.5MP Full-HD Miniature GENLOCK POV Camera with interchangeable lens

CV500-series mini-cams capture
College Volleyball at the NET


Courtesy of Streampoweredproductions
  • 2.5 Megapixel 1/3-inch CMOS Sensor
  • 3.7mm Megapixel M12 Prime Lens installed (interchangeable)
  • GENLOCK Tri-Level Sync at camera level to ensure clean switching between cameras
  • Sync in 3GSDI (1080p59.94/50/60fps) as well as HDSDI (1080i59.94/50/60fps and 1280x720p59.94/50/60fps)
  • Supports resolutions of 1920x1080p, 1920x1080i, and 1280x720p
  • Supports frame rates of 59.94, 50, 60, 29.97, 25, 30fps
  • Camera will adjust to Resolution & Framerate of Sync source
  • 3G/HD-SDI (BNC) & HDMI (full size v1.3) built into rear panel
  • Hirose-style (I/O) connector contains: Sync-IN, Sync-OUT, RS-485 connect, 12V power connector & TRS Mic/Line level (selectable) input with 2.5V power
  • Captures sharp & vivid color images at 0.2lux (low light sensitive)
  • New WDR function adjusts automatically to bright and dark areas in FOV
  • Audio Mic/Line level audio embedding w/ 2.5V power supplied
  • OSD Menu Joystick on cable and RS-485 connectable (Visca/Pelco)
  • Free downloadable software to control camera settings via RS485 (requires USB to RS485 converter)
  • Stepped (Red/Blue) Gain Control, Gamma, Shutter, Brightness
  • Compatible with Marshall RCP Controll Unit, p/n: CV-RCP-100
3G/HD-SDI/HDSDI/HDMI Full-HD Miniature GENLOCK POV Camera rear and side views

Marshall Electronics next generation Miniature GENLOCK CV565-MGB PRO-Series Camera adds the convenience of Signal Sync at camera level to ensure seamless switch transitions between cameras on location.

Using Tri-Level Sync the CV565-MGB locks 3G/HD video signals (genlock) up to 1920x1080p @ 59.94/50/60 frames per second, as well as 1920x1080i @ 59.94/50/60fps and 1280x720p @ 59.94/50/60fps. Also featuring a 3.5mmTRS Mic/Line level (selectable) input with 2.5V power and broadcast convenient HDSDI/3GSDI (BNC) & HDMI (v1.3) simultaneous outputs. Built around next generation chip sets and a state-of-the-art 1/3" megapixel sensor improves every aspect of previous models. Capturing broadcast quality HD video from 2,476,296 pixels (2.5MP) of clear, crisp video at full-HD resolutions of 1920x1080i, 1920x1080p, 1280x720p & frame-rates of 60/59.94/50/30/29.9 7/25fps.

New proprietary pixel technology offers the lowest noise ratio on the market today capturing sharp, vivid color images in very low light conditions. Industry leading low power consumption draws very low power in full-HD resolutions. CV565-MB/M Pro-Series POV Cameras continue to offer Field-of-View flexibility with interchangeable lenses. Expanded RS-485 protocols offer remote camera control (RCP) communication via VISCA and PELCO where commands can be sent without OSD Menu. Marshall Pro-Series Cameras continue to establish a broadcast standard for POV cameras with ease of use and broadcast centric feature sets.


Hirose Breakout (I/O) Cable (Included)

Genlock cable


  • 1. Hirose Connector (plugs into camera)
  • 2. OSD Menu Control
  • 3. Genlock Sync-IN
  • 4. Genlock Sync-OUT
  • 5. 12V Power Plug (2.1mm)
  • 6. RS-485 connector (+/-)
  • 7. 3.5mm TRS line-level Input (2.5V)

CV565-MGB Applications:

• Broadcast Television • Professional Sports • College Sports • OB Vans/Trucks • Concert & Studio Music Video • Reality TV • Performing Arts • Culinary Shows • Car TV Shows • Hidden Camera Shows • International Racing Circuits • Off-road Racing • Horse Racing • House of Worship • POV Video Shots

Camera Control Software

POV Camera Control Software

Compatible HD Prime Lens Options (M12):

Part Number Description & Horizontal AOV
CV-4702.3-3MP 2.3mm, F2.2 3MP M12 lens; Horiz AOV = 126°
CV-4702.8-3MP-IR 2.8mm, F2.6 3MP M12 lens; Horiz AOV = 100°
CV-4703.6-3MP 3.6mm, F2.0 3MP M12 lens (stock); Horiz AOV = 72°
CV-4706-3MP-IR 6.0mm, F2.4 3MP M12 lens; Horiz AOV = 48°
CV-4708.0-3MP 8.0mm, F1.8 3MP M12 lens; Horiz AOV = 40°
CV-4712.0-3MP 12.0mm, F1.8 3MP M12 lens; Horiz AOV = 33°
CV-4716.0-2MP 16.0mm, F1.8 2MP M12 lens; Horiz AOV = 25°


Compatible HD Varifocal Lens Options (M12):

Part Number Description & Horizontal AOV
CV-2812-3MP 2.8~12mm, F1.4 3MP Varifocal M12 lens; Horiz AOV = 108~3°
CV-0622-5MP 6.0~22mm, F1.6 5MP Varifocal M12 lens; Horiz AOV = 46~16°
*Horizontal Angle-of-Vew (AOV) in degrees are approximate and vary according to exact sensor size and design.
**If camera model contains IP67 weatherproof cap, there may be some limitation as to which lenses will allow cap to fit back on camera.
Touchscreen RCP Camera Control

CV-RCP-V2

Touchscreen RCP Camera Control
Remote adjust & match cameras via RS485

Mini Camera Stands and Mounts accessories

1/4"-20 Mounts

1/4"-20 Compact Camera Stands & Mounts,
Clamps, Articulating arms and more...

Touchscreen RCP Camera Control

CV-USB-RS485

USB to RS485/422 Adapter for use with Marshall Windows Camera Control Software.

Call for Price

HDBaseT Transmitter and Receiver

VAC-HT12-KIT

VAC-HT12-KIT - Transmitter / Receiver

CV502/505-series Live from Las Vegas, Nevada

CV502/505-series Live from Las Vegas, Nevada

CV502/500 mounted on Hockey Helmet

CV502 capture wide-shot at College Basketball game

CV502/500 mounted on Basketball Backboard

CV502/500 mounted on Volleyball Net

Full-HD 3G/HD-SDI 2.5MP mini Broadcast POV Camera

Camera Control Application

  1. Download Camera Control Program HERE
  2. Use USB to RS485/RS422 Converter (CV-USB-RS485)
  3. Use cat5 or 24AWG twisted-pair wire (sold separately)
  4. Connect cable from RS485(+) terminal on Camera to T/R (+) on USB/RS485 converter
  5. Connect cable from RS485(-) terminal on Camera to T/R (-) on USB/RS485 converter
  6. Plug USB cable from USB/RS485 converter into USB port on Laptop or Computer (note ComPort#)
  7. Open up CamControl Program and match Serial Port to corresponding ComPort# used
  8. Select Baudrate in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > BAUDRATE
  9. Select Camera Address in CamControl Program and match it in Camera OSD Menu under DISPLAY CONTROL > CAM ID
  10. Select Open in CamControl Program
  11. Test connection by pushing MENU in lower right of CamControl Program - OSD Menu should come up on video signal
  12. Commands can also be sent without using OSD Menu
POV Camera Control Software Advanced Menu