Page 14 - IPTV Digital Catalog 2014
P. 14
VS-102-HDmI Marshall Electronics

VS-102-HDSDI IPTV Division VS-102 Specifi cations Encoder, Decoder

System Mode
System
H.264 Encoder/Decoder Network Network Interface Ethernet 10/100Base-T (RJ-45)
Network Protocol TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP
Features Standards Main Stream: H.264

• High Quality AV Encoder / Decoder Bitrate Secondary Stream: H.264 MJPEG
32 ~ 10,240 Kbps
(User Selectable) Resolution 1920 x 1080/60i ~ 352 x 240/30fps, 18 resolution step
• Full HD resolution 1080p Encoding / Frame Rate Range 1 ~ 30fps
Decoding Video Input 1 1 x HDMI type-A, HDMI RX

• Up to 30fps @ 1920 x 1080 streaming Input 2 VS-102-HDI: 1 x BNC: Composite (Default)
VS-102-HDSDI: 1 x BNC: HD-SDI
• H.264 & H.264 MJPEG Dual Streaming Output 1 1 x HDMI type-A, HDMI TX
VS-102-HDI: 1 x BNC: Composite (Default)
• Two-Way Audio Communication Output 2 VS-102-HDSDI: 1 x BNC: HD-SDI

• Mono Codec G.711 for Security applications Motion Detection Sensitivity Adjustment
Standards G.711, AAC
• Stereo Codec AAC for Broadcast Sample Rate G.711: 8kHz / AAC: 32kHz
applications Audio Data Rate G.711: 64Kbps, AAC: 64Kbps, 128Kbps

• HDMI Video Input / Output Input 1 x Line-In (Mini-Stereo)
Output 1 x Line-Out (Mini-Stereo)
• Composite Video Input / Output Port 1 1 x RS-232 (Terminal Block)

• Audio Input / Output Serial Port 2 1 x RS-422/485 (Terminal Block)
Data Rate 2,400bps ~ 115,200bps
• Instant Recording to an optional USB drive Sensor Input 2 x NO Contact (Terminal Block)
(USB 2.0) Alarm Output 2 x NO Contact (Terminal Block)
Sensor/Alarm
• Supports DDNS (Dynamic Domain Name Beep 1 x Buzzer 88 dB Min
Server) VS-102-HDSDI User Interface Reset Button 1 x Factory Reset Button
System Status
4 x LED
• Built-in PoE (Power Over Ethernet: 802af) Only Storage Recording/Backup 1 x USB 2.0 Port
• RS-232 control built-in Software VS Manager/VMS-16 NVR Live Monitoring, Recording, Search & Playback, Backup
Dimensions 134(W) x 125(D) x 35(H)mm
• RS-422 / 485 control built-in Weight 504 g
HDMI HD/SD-SDI Physical Power DC 12V/0.8A, PoE (Power over Ethernet): 802.3af
• 2 Sensor Inputs, 2 Alarm Outputs FULL HD Dual Streaming Motion Detection HD/SD-SDI Power Consumption Max 9.6W
• Watchdog for system recovery Operating Temperature -10°C ~ 50°C / 14°F ~ 122°F

• Integrated Video Motion Detection PoE
2 Way Audio G.711/AAC PoE FTP Recording PSIA
• Transmission of Video Data through FTP
server

• Wide Range of Video Bit Rate Control ONVIF
(32Kbps ~ 10Mbps)

• PSIA and ONVIF compliant



Features, specifi cations, and dimensions are subject to change without notice.
Physical appearance of products may vary slightly from images shown on this document. Please visit our website for updates and information. VER. 2.0
www.Marshall-usa.com support@marshall-usa.com • 800-800-6608 • Toll Free: 333-0606
14 15
   9   10   11   12   13   14   15   16   17   18   19